 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CD 269 PH Series 4 000h at 125C CD 281 LL CD 11G GW higher voltage * High Reliability at High Temperature * Automotive * Professional Long-Life Applications CD 263 BK lower ESR 125C longer life CD 287 GC 125C CD 269 PH lower ESR CD 284 XY Item Operating Temperature Range (C) Voltage Range (V) Capacitance Range (F) Capacitance Tolerance (20C, 120Hz) Leakage Current (A) Characteristics -40 ~ +125 10 ~ 63 47 ~ 3300 20% After 2 minutes at 20C application of rated voltage, leakage current is less than 0,04CV. C: Nominal Capacitance (F) V: Rated Voltage (V) Dissipation Factor (20C, 120Hz) Tan(max) 0,20 0,16 0,14 0,12 0,10 0,09 For Capacitances >1.000F add 0,02 to every 1.000F Useful Life Lifetime Leakage Current Capacity Change Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level 000h >200 000h Load Life 2 000h Endurance Test 3 000h 1 000h Shelf Life Not more than specified value Within 50% of initial value Not more than 500% of specified value Not more than specified Not more than specified value value Within 30% of initial value Not more than 300% of specified value UR IR 125C Within 30% of initial value Not more than 300% of specified value UR IR = 0 125C Not more than specified value Within 30% of initial value Not more than 300% of specified value UR = 0 IR = 0 125C After test: UR to be applied for 30min >24h before measurement UR IR 125C 1% Failure Rate UR 1,4 x IR 50C 1% Failure Rate guaranteed Multiplier for Ripple Current Frequency Coefficient 2.5 Lifetime Diagram 120Hz 1kHz 0,75 0,85 0,88 0,90 10kHz 0,90 0,95 0,96 0,98 100kHz 1,00 1,00 1,00 1,00 0.5 1.0 Frequency Capacitance (F) 47 ~ 100 220 ~ 330 470 ~ 1 000 2 200 ~ 3 300 0,40 0,50 0,60 0,75 IA --- 2.0 CD 269 PH Series IR 1.5 X32 Lifetime Multiplier X16 X8 X4 X2 X1 0.0 60 70 80 90 100 110 120 130 TA (C) IA = actual ripple current at 100kHz, IR = rated ripple current at 100kHz, 125C Multiplier of Useful Life as a function of ambient temperature and ripple current load Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 29 Radial Rated Voltage (V) 10 16 2 0 6 CD 269 PH Series Ratings for CD 269 PH Series VDC (Surge Voltage) Code Rated Capacitance Max ESR 20C, 120Hz Max Imp 20C, 100kHz Max Imp -10C, 100kHz Max Ripple Current 125C, 100kHz Size ODxL (V) (F) 330 470 1 000 2 200 3 300 220 () 0,80 0,57 0,27 0,14 0,10 0,97 0,65 0,46 0,22 0,11 0,85 0,57 0,40 0,19 1,60 0,73 0,49 0,34 0,16 1,33 0,61 0,41 0,29 2,55 1,20 0,55 0,37 () 0,33 0,24 0,12 0,061 0,050 0,33 0,24 0,20 0,077 0,050 0,23 0,20 0,12 0,061 0,33 0,20 0,12 0,077 0,050 0,36 0,20 0,12 0,10 0,68 0,38 0,18 0,14 () 0,66 0,48 0,24 0,13 0,10 0,66 0,48 0,40 0,16 0,10 0,46 0,40 0,24 0,13 0,66 0,40 0,24 0,16 0,10 0,72 0,40 0,24 0,20 2,1 1,2 0,54 0,42 (mArms) 340 500 770 1 250 1 380 340 500 630 920 1 380 480 630 770 1 250 340 630 770 920 1 380 420 655 780 1 060 245 425 665 900 (mm) 8 x 11,5 10 x 12,5 10 x 20 12,5 x 25 16 x 25 8 x 11,5 10 x 12,5 10 x 16 12,5 x 20 16 x 25 8 x 16 10 x 16 10 x 20 12,5 x 25 8 x 11,5 10 x 16 10 x 20 12,5 x 20 16 x 25 10 x 12,5 10 x 20 12,5 x 20 12,5 x 25 8 x 11,5 10 x 16 12,5 x 20 12,5 x 25 10 (13) 1A 16 (20) 1C 330 470 1 000 2 200 Radial 220 25 (32) 1E 330 470 1 000 100 35 (44) 1V 220 330 470 1 000 100 50 (63) 1H 220 330 470 47 63 (79) 1J 100 220 330 Custom products are available on request. Impedance Ratio Capacitance Ratio 16V 2 200F 63V 2 20F 10 C/Co 100 000 Z/Zo 100 1.20 1.10 1.00 0.90 1.0 0.80 0.70 0.1 100 0.60 1 000 10 000 - 40 - 25 - 10 20 55 85 105 125 f (Hz) Z = actual Impedance of each frequency at 20C Zo = Impedance at 100kHz, 20C Impedance Ratio as a function of frequency 25V 1 000F C = actual capacitance of each temperature at 100Hz Co = Capacitance at 20C, 100Hz Capacitance Ratio as a function of temperature (typical curve) T (C) 0 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 Part Number System Order Code SMD, Radial, Snap-In EC Technology EC = Electrolytic Capacitor PC = Polymer Capacitor R Terminal Type SMD Radial =V =R 1C Rated Voltage Code For coding please refer to the pages of ratings PT Series Code CD VS CD VH CD VZ CD 261 CD 262 CD 26 CD 269 CD 281 CD 28 CD 287 CD 28L CD 29 CD 29 CD 29 CD 296 CD 297 CD 299 101 Capacitance Code (in F) 1,0 = 010 100 = 101 1 000 = 102 M Capacitance Tolerance = M SMD: =K Taped FF Lead Form 2 Terminal/ Pitch Size = FF 0611 Dimension 4x7 = 0407 = 0511 = 3580 JE xxxxx for Specials only = BS = VH = VZ = LK 0,47 = R47 20% 10% Terminal = T2 2,0mm 2,5mm 3,5mm 5,0mm 7,5mm = 20 = 25 = 35 = 50 = 75 5x11,5 35x80 Snap-In = S 2,2 = 2R2 +30 / -10% = Q +50 / -10% = T Radial: Long Lead = LL 6,3x11,5 = 0611 = CB = CC CD 261X = QX Cut 5,0mm Cut ,mm 45x100 = 45100 = QM 10 000 = 103 = BK = PH = LL = XY = GC = QL = BZ = BW = BC = KC = BB = PG Cut 4,0mm Cut 3,5mm Cut 3,0mm = CD = CE = CF 10,0mm = 10 12,5mm = 12 on request: alternative lead forms (axial, 90 - angle, others) Snap-In: 4,0mm Pin Length Soldering Pin preferred = T4 = S4 2 Pin 3 Pin 4 Pin 5 Pin = P2 = P3 = P4 = P5 6,mm Pin Length = T6 CD 29D = HR CD 29H = QH CD 29L HCP HPM HVC = QL = CP = PM = VC Technical Specification SMD Type Dimensions O DxL x , x , 6, x, 6,x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 A B C E L W 1,8 4,3 4,3 1,0 5,4 2,1 5,3 5,3 1,3 5,4 2,4 6,6 6,6 2,2 5,4 2,5 6,6 6,6 2,2 7,7 2,9 8,3 8,3 3,1 10,5 2,9 8,4 8,4 3,1 11,8 3,2 10,3 10,3 4,5 10,5 3,2 10,4 10,4 4,5 12,7 in mm 0,5 - 0,8 0,7 - 1,1 Taping Dimensions Size (DxL) w 0, A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 7,7 8 x 10,5 8 x 11,8 10 x 10,5 10 x 12,7 12,0 12,0 16,0 16,0 24,0 24,0 24,0 24,0 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 8,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 5,8 5,8 5,8 8,4 11,0 12,3 11,0 14,0 5,5 5,5 7,5 7,5 11,5 11,5 11,5 11,5 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 6,3 8; 10 Polymer 14 1 18 1 25 1 25 1 50 1 50 1 50 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. v2006.2 8 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L OD F L7 L 11 3 1 4 1,5 5 2,0 1,0 6,3 2,5 0,45 8 3,5 5 2,0 6,3 2,5 0,5 8 3,5 10 12,5 16 5,0 0,6 2,0 7,5 0,8 18 20 22 1,0 25 12,5 10,0 O d 0,4 aMax in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range OD 4~6 Dimensions F 0,5 2,5 P 0,1 12,7 A 8 13 18,5 3,5 12,7 Form L (max) H 0,75 Ho 0,5 13 18,5 - Ammopack Form A 4~8 7 17,5 Form B FF 5 ~ 6,3 13 18,5 16 12,7 B 8 22 20,0 5 10 22 18,5 A Form C 12,5 27 18,5 - 15,0 FD 12,5 27 18,5 - 25,4 C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code I preferred CB 5,0 0,5 CC 4,5 0,5 CD 4,0 0,5 CE 3,5 0,5 CF 3,0 0,5 in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 9 |
Price & Availability of CD269PH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |